Contact Us

Jasper Electronics Co.,Ltd

Add:5/F, Block A, No.4 Bldg., Xinlianhe Industrial Park,Heyi, Shajing, Shenzhen 518104, China

Tel:86-755-23009982, 23010026

Fax:86-755-23010026 ext 802


Note For Film Switches

- Apr 06, 2017 -

1. Film switch and film switch between the lining of the bubble film is the key to reduce pressure, prevent failure, should be retained;

2. Film switch on the reverse side of the transparent film is the protection of the film Switch display window, do not easily tear off;

3. Take out some of the film switches, should be in accordance with the beam is good, but absolutely not too tight bundle;

4. Have the handle, the large number of film surface paste, film switches, all need to put the vertical box, prevent the key to the pressure of long time failure;

5. Film switches to protect the outlet, can not be placed in the downward direction;

6. There is a display window of the film switch, in the holding, and put to prevent the material bending, will leave a crease;

7. The film switch is stored in room temperature, should be dustproof, moistureproof treatment, the ambient air is not acidic, alkaline or other corrosive gases.

Related Products