Contact Us

Jasper Electronics Co.,Ltd

Add:5/F, Block A, No.4 Bldg., Xinlianhe Industrial Park,Heyi, Shajing, Shenzhen 518104, China

Tel:86-755-23009982, 23010026

Fax:86-755-23010026 ext 802


what principal membrane switch should be following to produce?

- Sep 18, 2017 -

Membrane switch is also can be stored, but there are some matters of principle, we should pay attention to:


1.Membrane switchAnd membrane switch between lining by bubble film is to be the keys to reduce pressure, prevent failure, should be retained;


  2. The front side of membrane switch of the transparent membrane is to protect the membrane switch display window, do not tear easily;


  3. Take out a few pieces of membrane switch, in accordance with the same beam is good, but absolutely can't bundle is too tight;


  4. A touch, a large number of film stickers, membrane switch, packing and needs to be kept upright, prevent button long time stress failure;


  5. Membrane switch wire to protect good, can't line down placed;


  6. Display window membrane switch, put in, to prevent the material stress bending, will leave crease;


  7. Membrane switch for interesting indoor, dustproof, should do moistureproof processing, around without acid, alkali or other corrosive gases in the air.


Related Products