Categories

Contact Us

Jasper Electronics Co.,Ltd

Add:5/F, Block A, No.4 Bldg., Xinlianhe Industrial Park,Heyi, Shajing, Shenzhen 518104, China

Tel:86-755-23009982, 23010026

Fax:86-755-23010026 ext 802

Phone:+8613632625290

E-mail:sales@jasperele.com

E-mail:sales05@membraneswitch.co

Web:www.jasperele.com

Thin film panel key blocks

- Apr 14, 2018 -

    First, because there is a limit to the size of the metal shell fragments, but our customer to provide us with drawings is different, drawing the buttons above the size of the display area is not the same, the general circumstances?Only use the same products in the same type of metal shrapnel, such operator in the process of operation, there was no way to very accurately find the position of metal shrapnel, unable to make the lower conductive layer backflow current circuit, and the formation of a current order instructions.

  In the center of the installation in the process of metal shrapnel must aim at the center of the conductive path, but also be fixed.Button in the layers of the panel display area of the above letters generally will take shorthand way to save space, its size is generally under no greater than 2 times in a small metal shrapnel.If too much will lose balance, and in the process of operation, can not find the precise location of metal shrapnel.


   First, because there is a limit to the size of the metal shell fragments, but our customer to provide us with drawings is different, drawing the buttons above the size of the display area is not the same, the general circumstances?Only use the same products in the same type of metal shrapnel, such operator in the process of operation, there was no way to very accurately find the position of metal shrapnel, unable to make the lower conductive layer backflow current circuit, and the formation of a current order instructions.

  In the center of the installation in the process of metal shrapnel must aim at the center of the conductive path, but also be fixed.Button in the layers of the panel display area of the above letters generally will take shorthand way to save space, its size is generally under no greater than 2 times in a small metal shrapnel.If too much will lose balance, and in the process of operation, can not find the precise location of metal shrapnel.


Related Products